Dragon Skin 20 - Smooth On
Details
- Measuring and Mixing: Before you begin, pre-mix Part B thoroughly. After dispensing required amounts of Parts A and B into mixing container (1A:1B by volume or weight), mix thoroughly for 3 minutes making sure that you scrape the sides and bottom of the mixing container several times. After mixing parts A and B, vacuum degassing is recommended to eliminate any entrapped air in liquid rubber. Your vacuum pump must pull a minimum of 29 inches of mercury (or 1 Bar / 100KPa). Leave enough room in container for material expansion. Vacuum material until it rises, breaks and falls. Vacuum for 1 minute after material falls.
Specifications
Dragon Skin 20 available options:
- DS20-KIT: Dragon Skin 20 Kit
- DS201G: 1 gallon of Dragon Skin 20
More info
Dragon Skin 20: Dragon Skin silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin rubbers are used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C).
Time tested, versatile special effects material - Soft, super-strong and stretchy, Dragon Skin is used around the world to make spectacular skin and creature effects. An infinite number of color effects can be achieved by adding Silc Pig silicone pigment or Cast Magic effects powders.
Dragon Skin silicones are mixed 1A:1B by weight or volume. Liquid rubber can be thinned with Silicone Thinner or thickened with THI-VEX. Rubber cures at room temperature (73°F/23°C) with negligible shrinkage. Vacuum degassing is recommended to minimize air bubbles in cured rubber